I. Clarify Core Needs First: Scenarios Determine Product Types
Different waterproofing scenarios (such as bathrooms, roofs, basements, exterior walls, etc.) have significantly different performance requirements for waterproofing materials, which is the primary basis for selection.
1. Waterproof Coating: Suitable for Complex, Irregular Base Layers
Waterproof coating is a liquid or paste-like material that forms a continuous waterproof film through brushing, scraping, etc. It is especially suitable for scenarios with uneven base layers, pipes, internal and external corners, and other irregular structures (such as bathrooms, kitchens, balconies, small-area repairs of exterior walls, etc.).
Applicable scenarios:
Indoor: Floors and walls of bathrooms, kitchens, and balconies (especially details such as pipe roots and internal and external corners);
Local repairs: Roof cracks, water seepage points on exterior walls, etc.;
Irregular base layers: Areas with height differences, holes, and complex pipelines in the base layer.
2. Waterproofing Membrane: Suitable for Large-Area, Flat Base Layers
Waterproofing membrane is a prefabricated sheet material (such as asphalt membrane, polymer membrane, etc.) that forms a waterproof layer through paving. It is suitable for large-area, flat base layers with strong waterproof integrity and better durability.
Applicable scenarios:
Outdoor: Roofs, terraces, basement floors/walls, garage roofs;
Large-area projects: Roof waterproofing, underground engineering waterproofing (such as subways, tunnels);
Flat base areas: Such as concrete floors and flat walls.
II. Select Products Based on Base Layer Conditions
The flatness, dryness, and material of the base layer directly affect the adhesion and waterproofing effect of waterproofing materials, so targeted selection is required:
| Characteristics of the Base Layer | Suitable Waterproofing Materials | Analysis of Reasons |
|---|---|---|
| Uneven base layer with cracks/holes | Waterproof coatings (such as polyurethane, JS coatings) | Coatings can penetrate and fill gaps, fit tightly with the base layer, and avoid the "hollowing" problem when laying membranes. |
| Flat and dry base layer (such as concrete) | Waterproofing membranes (such as SBS membranes, HDPE membranes) | Membranes are efficient to lay, more convenient for large-area construction, and have better tensile and puncture resistance than coatings. |
| Moist base layer (such as basement) | Wet-laid waterproofing membranes, cement-based permeable crystalline coatings | These materials can cure or bond in a humid environment without waiting for the base layer to be completely dry. |
| Wooden/metal base layers | Elastic waterproof coatings (such as acrylic coatings) | Coatings have good flexibility and can adapt to slight deformation of the base layer, avoiding cracking of the waterproof layer due to material expansion and contraction. |
III. Pay Attention to Key Performance Indicators: Match Waterproofing Needs
Different scenarios have different requirements for "weather resistance, flexibility, impermeability" of waterproofing materials, so the following indicators should be focused on:
1. Weather Resistance: Resistance to Environmental Aging
Outdoor scenarios (such as roofs, exterior walls): Products with UV resistance, high and low temperature resistance, and anti-aging properties are required.
Membranes: Prefer SBS modified asphalt membranes (high temperature resistance), TPO/PVC polymer membranes (strong weather resistance, suitable for exposed use);
Coatings: Choose acrylic waterproof coatings (good weather resistance, suitable for exterior walls).
Indoor scenarios (such as bathrooms): Lower weather resistance requirements, ordinary waterproof coatings (such as JS, polyurethane) or self-adhesive membranes are sufficient.
2. Flexibility: Adaptation to Base Layer Deformation
Areas prone to settlement/vibration (such as basements, roofs): Materials need a certain degree of stretchability to avoid cracking.
Membranes: Choose highly elastic self-adhesive membrane (such as HDPE non-asphalt-based membrane), SBS modified asphalt membrane (high elongation);
Coatings: Choose polyurethane waterproof coating (good elasticity, tensile strength ≥ 2.0MPa).
Rigid base layers (such as concrete floors): Ordinary waterproof coatings or membranes are acceptable.
3. Impermeability and Durability: Core of Waterproofing Effect
Scenarios with long-term water immersion (such as bathrooms, pools): Materials with strong impermeability and resistance to water erosion are required.
Coatings: Prefer cement-based permeable crystalline coatings (penetrate into the base layer to form a waterproof structure), polyurethane coatings (good water resistance);
Membranes: Choose polymer membranes (such as PVC, HDPE) or modified asphalt membranes with strong water resistance.
Projects with high durability requirements (such as basements, roofs): Prefer membranes (service life is usually 10-20 years), while coatings are suitable for short-term or small-area waterproofing (service life 5-10 years, requiring regular maintenance).
4. Environmental Protection: Must-see for Indoor Scenarios
Indoor enclosed spaces (such as bathrooms, kitchens): Low-volatile, odorless, and environmentally friendly materials should be selected to avoid harmful gases such as formaldehyde and benzene.
Recommended: JS composite waterproof coating (water-based, good environmental protection), cement-based coating;
Caution: Solvent-based polyurethane coatings (contain volatile organic compounds, strong odor).
IV. Construction Difficulty and Cost: Combine Actual Conditions
Construction difficulty:
Waterproof coatings: Low construction threshold, suitable for DIY or small-area construction, but attention should be paid to uniform brushing and multiple coats (usually 2-3 coats);
Waterproofing membranes: Require professional construction teams, especially hot-melt membranes (such as SBS) which need open-fire operations. Self-adhesive membranes are relatively simple but have high requirements for the flatness of the base layer.
Cost budget:
Economical: Ordinary asphalt membranes, JS waterproof coatings (suitable for small-area scenarios with limited budgets);
Mid-to-high end: Self-adhesive membrane (such as HDPE non-asphalt-based), polyurethane coatings, TPO/PVC membranes (suitable for scenarios with high requirements for durability and environmental protection).
V. Pitfall Avoidance Guide: Avoid Choosing Wrong Products
Do not blindly pursue "universal materials": No material is suitable for all scenarios. For example, asphalt membranes are not suitable for indoor use (strong odor), and waterproof coatings are not suitable for large-area roofs (low construction efficiency).
Recognize regular brands and test reports: Check the product's "national standard test report" (such as GB 18242-2008 Elastomeric Modified Bituminous Waterproofing Membranes, GB/T 23445-2017 Polymer Cement Waterproofing Coatings) to ensure that indicators such as heat resistance and tensile strength meet the standards.
Consider later maintenance: Coatings are easy to repair (local repainting is sufficient), while membrane repair is difficult after damage. The selection should be based on the maintenance convenience of the scenario.
Summary: Quick Matching Formula
Small area + irregular base layer + indoor → Choose waterproof coating (such as JS, cement-based);
Large area + flat base layer + outdoor/engineering → Choose waterproofing membrane (such as SBS, HDPE self-adhesive membrane);
Moist base layer + long-term water immersion → Choose wet-laid membrane or cement-based permeable crystalline coating;
Environmental protection priority + indoor → Choose water-based waterproof coating or environmentally friendly self-adhesive membrane.
According to the above methods, combined with your own scenarios and needs, you can select cost-effective and highly adaptable waterproofing materials!

