Rain Fortress

FS-101 fluorosilicone modified high-adhesion waterproof coating exhibits excellent UV resistance, aging resistance, and high adhesion performance outdoors. This product is a high-performance waterproof coating made from imported fluorosilicone modified rubber as a base material, with the addition of various additives and fillers through scientific processing.

Features

1. Low water absorption, acid and alkali resistant, and high temperature resistant.

2. Excellent aging resistance and weather resistance.

3. Strong adhesion; the active ingredients in the coating can penetrate into the capillaries and microcracks of the cementitious substrate and react chemically, fusing with the substrate to form a strong and dense waterproof layer.

Scope of application

It is suitable for various substrates such as cement, glazed tiles, and ceramic tiles, and has a very high adaptability to different substrates.

Precautions

1. Construction should be carried out when the air temperature is between 5℃ and 35℃. Construction is not recommended on surfaces with standing water, and exposed projects should not be constructed on windy or rainy days.

2. Original sealed products should be stored in a dry, cool environment at a temperature above 0℃. Under normal storage and transportation conditions, the product's shelf life is one year.

3. This product is not a flammable or explosive material and can be transported as general cargo. During transportation, prevent exposure to direct sunlight and freezing temperatures.

Construction steps	Construction Project	Construction process
Step 1	Base surface treatment	The substrate surface should be flat, clean, and free of oil and dust. Dust, if encountered in cracks, pits, holes, etc., must be removed. Repair with a sealant;
Step2	Roller-applied interface agent	Apply the liquid from the white bag inside the bucket evenly to the base surface;
Step3	Stirring liquid material	Stir the liquid in the bucket thoroughly until it is evenly mixed;
Step4	Apply the first coat	Apply the paint to the prepared substrate using a roller brush;
Step5	Make a reinforcement layer	A polyester fabric layer is applied as a reinforcement layer.
Step6	Apply a second coat	Apply the second coat using the "cross-hatching" method, and wait... The drying interval should be greater than 4 hours;
Step7	Apply the third coat	The third coat can only be applied after the second coat has completely dried. Brush application, with a dosage of ≥2.5 kg/m², results in a natural coating.Drying requires more than 48 hours; in winter, the drying time should be extended. time;
Step8	Finished product protection	After completing the three rounds, take care to protect the finished product and avoid stepping on it;