Construction Temperature Of Waterproof Coatings

Dec 23, 2024

Leave a message

The construction temperature range of waterproof coatings is usually between 5℃ and 35℃. Specifically, different types of waterproof coatings have different requirements for construction temperature:

Water-based or water-soluble waterproof coatings: This type of coating will freeze when the temperature is too low, affecting the curing and film formation, so the construction temperature should not be lower than 5℃.
Polymer waterproof coatings: The construction temperature only needs to be kept above zero degrees Celsius.
Acrylic waterproof coatings: The construction temperature should be kept between 5℃ and 35℃.
JS waterproof coatings: The construction temperature also needs to be kept between 5℃ and 40℃.
The effect of construction temperature on the performance of waterproof coatings
Excessive temperature will cause the water or solvent in the waterproof coating to evaporate too quickly, making the coating thicker, increasing the difficulty of brushing, and affecting the construction quality. Excessive low temperature will freeze the coating, affecting its curing and film formation, reducing its bonding ability and waterproofing effect.

Construction suggestions in low temperature weather
In low temperature weather, the construction environment temperature must be higher than 5℃, and the base surface temperature should also reach above 5℃. To ensure the quality of the film after construction, it is recommended that the base temperature be maintained above 10°C. In addition, pay close attention to weather conditions during construction to avoid construction of exterior wall waterproof coatings in rainy and snowy weather.

 

news-500-375

Send Inquiry