Hey there! As a supplier of wet room membranes, I often get asked about the proper storage conditions for these essential waterproofing materials. In this blog, I'll share some key points on how to store wet room membranes correctly to ensure their performance and longevity.
Why Proper Storage Matters
Before we dive into the storage conditions, let's understand why it's so important to store wet room membranes properly. These membranes are designed to create a watertight seal in wet areas like bathrooms, showers, and saunas. If they're not stored correctly, their effectiveness can be compromised. Factors like temperature, humidity, and exposure to sunlight can all have a negative impact on the membrane's quality.
Temperature Considerations
One of the most critical factors in storing wet room membranes is temperature. Most wet room membranes are sensitive to extreme temperatures, both hot and cold.
- Cold Temperatures: When exposed to cold temperatures, the membrane can become brittle and lose its flexibility. This can make it difficult to install and may lead to cracks or tears during the installation process. For this reason, it's best to store wet room membranes in a place where the temperature doesn't drop below 5°C (41°F). If you're storing the membranes in a warehouse during the winter, make sure the area is heated or insulated to maintain a suitable temperature.
- Hot Temperatures: On the other hand, high temperatures can also cause problems. Excessive heat can cause the membrane to soften and become sticky, which can lead to adhesion issues. It's recommended to keep the storage temperature below 30°C (86°F). If you're storing the membranes in a hot climate, consider using air conditioning or a shaded area to keep the temperature down.
Humidity and Moisture
Humidity and moisture can also have a significant impact on wet room membranes. Moisture can cause the membrane to swell, warp, or develop mold and mildew.
- Low Humidity: A low humidity environment is ideal for storing wet room membranes. Aim for a relative humidity level between 30% and 60%. You can use a dehumidifier in the storage area to control the humidity if necessary.
- Avoid Water Exposure: Make sure the storage area is dry and free from any water leaks. If the membranes come into contact with water, they should be dried thoroughly before storage. It's also a good idea to store the membranes off the ground on pallets or shelves to prevent them from getting wet if there's a flood or water spill.
Sunlight and UV Exposure
Sunlight and ultraviolet (UV) rays can damage wet room membranes over time. UV rays can cause the membrane to degrade, lose its color, and become less effective at waterproofing.
- Store in a Dark Place: To protect the membranes from sunlight and UV exposure, store them in a dark area. If you're storing the membranes outdoors, cover them with a tarp or use a storage shed. Indoors, keep them in a closed cabinet or a room with limited sunlight.
- Use UV-Resistant Packaging: Some wet room membranes come with UV-resistant packaging. If this is the case, leave the membranes in their original packaging until you're ready to use them. This will provide an extra layer of protection against UV rays.
Storage Space and Handling
Proper storage space and handling are also important for maintaining the quality of wet room membranes.
- Adequate Space: Make sure there's enough space to store the membranes without overcrowding. Overcrowding can cause the membranes to get damaged or deformed. Leave some space between the stacks of membranes to allow for air circulation.
- Handle with Care: When handling the membranes, be gentle. Avoid dragging or dropping them, as this can cause tears or scratches. Use proper lifting techniques and equipment to move the membranes around.
Compatibility with Other Materials
If you're storing wet room membranes along with other materials, make sure they're compatible. Some materials may release chemicals or fumes that can react with the membrane and affect its performance.
- Separate Storage: It's a good idea to store wet room membranes separately from other chemicals, solvents, or building materials. If you need to store them together, make sure there's adequate ventilation to prevent any chemical reactions.
Specific Types of Wet Room Membranes
Different types of wet room membranes may have slightly different storage requirements. Let's take a look at some common types:
- Butyl Rubber Tape: Butyl rubber tape is a popular choice for wet room waterproofing. It's flexible and easy to install. When storing butyl rubber tape, keep it in a cool, dry place. Roll it up tightly and store it in its original packaging to prevent it from sticking to itself.
- Bituthene Membrane: Bituthene membranes are known for their excellent waterproofing properties. They're made of a bituminous material, which can be sensitive to temperature changes. Store Bituthene membranes in a temperature-controlled environment to prevent them from becoming too soft or too hard.
- PVC Waterproofing: PVC waterproofing membranes are durable and resistant to chemicals. However, they can be affected by UV exposure. Store PVC waterproofing membranes in a dark place to protect them from sunlight.
Conclusion
Proper storage of wet room membranes is crucial to ensure their performance and longevity. By following these storage guidelines, you can protect your investment and ensure that the membranes will work effectively when you're ready to install them.


If you're in the market for high-quality wet room membranes or have any questions about storage or installation, feel free to reach out to us. We're here to help you make the right choice for your waterproofing needs.
References
- Building Waterproofing Handbook, Various Authors
- Manufacturer's Guidelines for Wet Room Membranes

